Atomstack laser cutting machine is a modern high-tech equipment that can be used in various production and processing processes in the metal industry. Laser cutting machine uses high-energy-density laser beams to cut metal, which can accurately cut various metal sheets. It is one of the most commonly used cutting equipment in the field of metal processing. But when using a laser cutting machine, you also need to pay attention to some issues to ensure cutting quality and safety.

Security Question

1 Protective measures

The laser power of the Atomstack S20 Pro laser cutting machine is very powerful, and it is easy to cause harm to people, so you must pay attention to safety during operation. A protective door must be equipped to prevent exposure to the human body. In addition, when operating the laser cutting machine, it is necessary to wear protective equipment, such as special gloves, goggles, etc., to prevent the laser beam from shining on the body and eyes.

2 Site requirements

When using a laser cutting machine, it is necessary to choose a place without interference and a safer place, so that the use of the machine is more stable and safe. Warning signs should be marked in the venue so that staff and others can understand the relevant safety issues and use the equipment correctly.

3 Operating Specifications

The operating specifications of the laser cutting machine must be followed, and the equipment should be operated by professionals. Due to improper operation, the laser beam may deviate from the track, resulting in damage to equipment or injury to workers.

Material Selection

1 Types of materials

Atomstack S30 Pro laser cutting machine can cut many kinds of metal materials, such as: carbon steel, stainless steel, alloy steel, aluminum, copper, titanium and so on. Different materials have different processing conditions, and different adjustments and treatments are required according to different materials.

2 Thickness of the board

The cutting range of a laser cutting machine is also limited by the thickness of the sheet metal. Generally speaking, laser cutting machines can cut sheet metal with a thickness of 0.5 to 20mm. If it exceeds this range, there may be poor cutting effect.

Maintenance Of The Cutting Head

1 Check the cutting head regularly

The cutting head is the core component of the laser cutting machine, which is directly related to the cutting quality and equipment life. Therefore, it must be checked regularly to see if it is in good condition, and if any wear and other damage is found, it should be replaced and repaired in time.

2 Fuel and clean

Dust is easy to accumulate deep in the cutting head, which affects the cutting quality and the service life of the cutting head. Therefore, it needs to be cleaned and refueled regularly to ensure the normal operation of the equipment.

Laser Stability

Laser stability is one of the main factors affecting cutting quality. Therefore, it is necessary to monitor and adjust the output power, mode and wavelength of the laser to ensure that the laser is stable and the output power meets the requirements. At the same time, it is also necessary to maintain the cooling system of the laser to ensure that the temperature of the laser is stable, thereby ensuring the life of the laser.

Troubleshooting

Whether it is the Sculpfun S30 Pro Max laser cutter itself or during use, various problems and malfunctions may occur. Therefore, it is necessary to understand the common fault causes and troubleshooting methods in order to quickly solve the fault when it occurs.

Summarize

Laser cutting machine is an advanced equipment that plays an important role in the metal processing industry. However, if you do not pay attention to safety, material selection, cutting head maintenance, laser stability and other issues during use, the use effect and production efficiency of the equipment will be affected. Therefore, it is necessary to have a comprehensive understanding of the laser engraver and operate it in a standardized manner in accordance with the equipment's instruction manual.