The Atomstack S20 Pro laser engraver is an increasingly popular tool for detailed, efficient, and precise engraving. But it also has certain potential safety hazards, so safety regulations must be strictly followed when using a laser engraving machine. This article will introduce you to the safe use guidelines for using laser engraving machines.

Understand The Basics Of Laser Engraving

Before getting started with a laser engraver, it's important to understand the basics of laser engraving. The working principle of laser engraving is to form a pattern by heating and evaporating the material through a laser beam. The energy of the laser beam is very powerful and harmful to human eyes and skin. Because the energy concentration of the laser is very high, any accident may lead to serious consequences.

It is very important to understand the tools and operation steps of Atomstack laser engraver. Read the user manual of the laser engraving machine to be familiar with the operation and precautions of the machine.

Install The Laser Engraving Machine

When installing a laser engraving machine, it is necessary to ensure that the site and power supply meet safety standards. The laser engraver must be placed on a stable surface, not on combustible objects, or around electrical wires or other equipment.

In addition, when installing a laser engraving machine, it should be ensured that the heat dissipation is good, there are no flammable or explosive items around the equipment, and the risk of network exposure can be reduced as much as possible through appropriate network settings.

Wear Personal Protective Equipment

It is very important to wear personal protective equipment when using the Atomstack S30 Pro laser engraver. This includes things like goggles, gloves and masks. Goggles must have a high standard of laser protection and ensure that the laser beam does not reach the eyes. Gloves can prevent hands from being burned by the laser focus. Masks can reduce the risk of inhalation of fumes generated during laser engraving and protect the respiratory system.

Operate The Laser Engraving Machine

Before operating a laser engraver with LaserPecker 3, the following steps must be followed:

1. First, check whether the machine is working properly and whether there is any damage or defect.

2. Put all switch control ports in the closed state.

3. Start the computer program according to the equipment requirements, and confirm that the printing task is processed.

4. Adjust the relevant parameters of the laser engraving machine according to the type of engraving material required and the design you want to create.

5. Place the object to be carved within the engraving range and fix it with a clip.

6. Put on the goggles and close the door (if any) to prevent the laser beam from escaping.

7. Start the laser engraving machine and let the laser start processing. During this process, you must pay close attention to the working status of the laser engraver and make sure not to leave the machine.

8. During the operation of the laser engraving machine, use air purification equipment to discharge the generated smoke to a safe area to avoid poisoning the body.

Maintenance Of Laser Engraving Machine

It is also very important to maintain the normal maintenance of the laser engraving machine. Maintenance includes the following aspects:

1. Clean the laser engraving machine equipment and environment. The laser engraving machine should be kept clean and tidy, and the material should be cleaned up. The case and lens should be cleaned periodically.

2. Check all parts of the laser engraving machine. Maintenance work should be carried out regularly, and problems should be solved in time.

3. Avoid maintenance without corresponding protective measures. When performing equipment maintenance, especially maintenance related to electricity, it should be carried out under the guidance of professionals.

4. Regularly replace the consumables on the equipment.

Handling Measures In Case of Emergency

Even when professionals are working with the Ortur Laser Master 3 laser engraver, accidents or emergencies are bound to happen. In this case, immediate measures must be taken to ensure the safety of personnel and equipment. In the event of a sudden dangerous incident, first confirm whether there are casualties, contact the on-site disposal personnel urgently and activate the emergency plan.

Summary

Laser engraving machines have gradually become popular in China, but when using laser engravers, you must pay attention to safety. When using a laser engraving machine, it is necessary to wear personal protective equipment, perform regular maintenance and monitor the laser output, and must strictly abide by safety regulations. Only in this way can our health and life safety be ensured. For more engraving machine related knowledge, please see Htpowlasers official website.