Atomstack laser engraving machine is an advanced CNC processing equipment, which uses laser beams to perform engraving, cutting and other processing processes on the surface of materials. It has the advantages of high precision, high efficiency and low cost, and is widely used in jewelry, toys, advertising and other fields. However, for many beginners, how to operate the laser engraving machine is a big problem. In this article, I will introduce the operation suggestions of laser engraving machine in detail for you.

Safe Use

Safety is the first priority when operating the Atomstack S20 Pro laser engraver. Since the laser engraving machine mainly uses the laser beam for processing, the following points should be paid attention to when using it:

1. Wear personal protective equipment: When operating the engraving machine, you should wear suitable protective clothing and gloves to prevent the laser from entering the eyes or skin and causing damage.

2. It is forbidden to look directly at the laser beam: During the operation, remember not to look directly at the laser beam, and observe through a special observation window or camera.

3. It is forbidden to operate unstable power supply: if the power supply is unstable, power off and wait for the power supply to stabilize before operating.

Debug Correctly

After you get the laser engraving machine from Htpowlasers, you need to do the correct debugging. During debugging, the following points should be paid attention to:

1. Test equipment: First test whether the equipment is working normally, including power switch, processing platform, and laser head, to ensure that there is no abnormality or damage to the equipment.

2. Parameter setting: Set the parameters of the laser engraving machine according to your needs and the material to be engraved. Parameter settings include laser power, speed, processing depth and focal length, etc.

3. Focus adjustment: adjust the focus to get the best cutting quality. For different materials and processing requirements, different focal lengths need to be adjusted.

Choose The Right Material

Laserpecker laser engraving machine can process and cut a variety of materials, such as wood, plastic, metal, stone, glass and so on. However, different materials have different processing methods and parameters, so the following points should be paid attention to when selecting processing materials:

1. Material texture: Materials with different textures require different parameters for cutting, such as cork requires low-power laser cutting, while steel requires high-power laser cutting.

2. Surface state: If the surface of the material is uneven or has protrusions, it may cause focus shift or damage the laser head.

3. Safety: Pay attention to safety when selecting materials, and avoid using explosive, toxic or radioactive materials as much as possible.

Processing Operations

After selecting the material and adjusting the parameters, the laser processing operation can be carried out. During the processing operation, the following points should be paid attention to:

1. Preparation before processing: Before processing, the surface of the material should be cleaned and the processing platform should be adjusted to make it level.

2. Program setting: Through CAD or other design software, generate a cutting program for the graphics or text that needs to be processed, and import it into the LaserPecker 3 laser engraving machine for processing.

3. Monitoring the processing process: During the processing process, it is necessary to observe the processing situation at all times, especially the distance between the focus and the material. If abnormalities are found, stop processing immediately and check the laser engraving machine.

4. Cleaning after processing: After the processing is completed, the processing platform should be cleaned and the equipment should be turned off. Be careful not to touch the uncooled parts.

Summarize

Laserpecker 2 laser engraving machine is an efficient and precise processing equipment, which is widely used in many fields. When operating a laser engraving machine, pay attention to safety, correct debugging, selection of appropriate materials, and standard processing operations. Through the above operation suggestions, I believe beginners can easily operate the laser engraver.